Here is a Sheet Metal Joints Manufacturer talking about how to reduce the wear of the wire joint.
If you want to know more about Metal Joint For Lean Pipe Sale, feel free to contact us.
Metal Joint For Lean Pipe Sale
Wire rod joint products are also called Lean Pipe Joint. They can be designed according to the conditions in the factory floor and the requirements and ideas put forward by consumers. The assembly and disassembly of wire rod joint products is extremely convenient, flexible and without welding.
In daily life, we can use wire rod combination joints to assemble a variety of work stations, shelves, turnover vehicles, flexible assembly lines and other structural equipment. This product can also be used in a variety of different fields, such as: automotive industry, communications industry, bioengineering, electronics manufacturing, precision hardware and other diverse production links.
However, after the wire rod joint has been used for a period of time, the strips and rails will have some wear, so how to reduce the wear of the rod joint? Let me answer for you now!
First, if the bar joint is obviously sloshing when working, then we need to adjust the bar of the bar, the position of the bar is generally below the workbench, and together with the slider. The stroke of the bar should be changed frequently. Don't always use the same place. Otherwise, the guide rail of the lean tube will wear out very badly. If a work piece with a large stroke is processed, an error may occur.
Second, the bar of the bar joint is also located under the workbench. Always take out the strip to scrub it, and clean the oil inside, and do not adjust the box too tightly. This will increase the amount of wear, and the rods should always be added with lubricants, especially the guide rails, dovetail slots, and the position of the lead screw!
Third, when receiving the wire rod joint product, we should first use a clean cotton cloth, scrub the metal rail surface of the wire rod and the lead screw all over again, then apply the machine tool lubricant, and before using the wire rod product, we must Inject a proper amount of lubricant into the handwheel of the bar first, and ensure that the machine guide rails are clean as much as possible. Finally, don't forget to carefully clean the iron pins on the workbench before leaving work, be sure to keep it clean!
There are many characteristics of wire rod joints, as follows:
1. Composition: It consists of special composite steel pipes, joints and special accessories, and is durable and durable.
2. Innovation: flexible and flexible, flexible and other characteristics, unconventional. Various originals can be reused.
3. Simple: It can easily produce a wide variety of products with a wide variety of joints. Moreover, the tools used in this process are very simple, only need a pipe cutter, a hex wrench, a tape measure, a spanner wrench, and the operator can make the installation by himself without much training.
4. Design: Based on the customer's production, process arrangement, working time, method, logistics flow and other data, the most economical and easy-to-use logistics solution is tailored for customers.
5. Environmental protection: the production process does not need to use welding, grinding, painting and other sources of sound, air and other pollution, can completely achieve the purpose of clean production.
Sign up to receive our newsletter and exclusive discounts and offters.